Titanium Alloys Database for Medical Applications
DOI:
https://doi.org/10.30544/MMD5Abstract
Titanium alloys are widely applied, particularly in biomedical engineering, due to their exceptional combination of mechanical strength, corrosion resistance, and biocompatibility. The low modulus of elasticity of these titanium alloys in comparison to other materials used in medical applications is a main characteristic. However, some of these alloys' components, such as aluminum and vanadium, can have adverse effects on the human body. Consequently, new titanium alloys with low modulus of elasticity and no toxic alloying elements are currently being developed. In this research, 238 titanium alloys were collected, almost entirely composed of biocompatible alloying elements. The primary motivation behind creating such a database is to establish a foundation for designing new alloys using machine learning methods. The database can assist researchers, engineers, and biomedical professionals in developing titanium alloys for various medical applications, thereby improving health outcomes and driving advancements in biomaterials and biomedical engineering.
Database URL: https://doi.org/10.5281/zenodo.7802694
Keywords:
Titanium Alloys Database; Biocompatible; Medical Applications; Biomedical; Non-Toxic Elements.References
Azmat, Ambreen, Muhammad Tufail, and Ali Dad Chandio. "Synthesis and Characterization of Ti-Sn Alloy for Orthopedic Application." Materials 14, no. 24 (2021): 7660.
Bandyopadhyay, Amit, Indranath Mitra, Stuart B. Goodman, Mukesh Kumar, and Susmita Bose. "Improving Biocompatibility for Next Generation of Metallic Implants." Progress in Materials Science (2022): 101053.
Bertrand, E., T. Gloriant, D. M. Gordin, E. Vasilescu, P. Drob, C. Vasilescu, and S. I. Drob. "Synthesis and characterisation of a new superelastic Ti-25Ta-25Nb biomedical alloy." Journal of the mechanical behavior of biomedical materials 3, no. 8 (2010): 559-564.
Chen, Juan, Fengcang Ma, Ping Liu, Chaohu Wang, Xinkuan Liu, Wei Li, and Qingyou Han. "Effects of Nb on superelasticity and low modulus properties of metastable β-type Ti-Nb-Ta-Zr biomedical alloys." Journal of Materials Engineering and Performance 28 (2019): 1410-1418.
Cheng, Yuanyao, et al. "Effect of Prior Cold Reduction of C-Si-Mn Hot-Rolled Sheet on Microstructures and Mechanical Properties after Quenching and Partitioning Treatment." Metals 12.5 (2022): 799.
Cleather, Daniel J., Jon E. Goodwin, and Anthony MJ Bull. "Hip and knee joint loading during vertical jumping and push jerking." Clinical biomechanics 28, no. 1 (2013): 98-103.
Cui, WenFang, AiHong Guo, "Microstructures and properties of biomedical TiNbZrFe β-titanium alloy under aging conditions." Materials Science and Engineering: A 527, no. 1-2 (2009): 258-262.
Cui, WenFang, AiHong Guo, Lian Zhou, and ChunMing Liu. "Crystal orientation dependence of Young's modulus in Ti-Nb-based β-titanium alloy." Science China Technological Sciences 53, no. 6 (2010): 1513-1519.
Sharma, Ravikant, Vinod Kumar Mittal, and Vikas Gupta. "Homogeneous modelling and analysis of hip prosthesis using FEA." In Journal of Physics: Conference Series, vol. 1240, no. 1, p. 012118. IOP Publishing, 2019.
Davidson, J. "Biocompatible low modulus titanium alloy for medical implants." Patent NumberEP 0437079 (1991).
Davis, Rahul, Abhishek Singh, Mark James Jackson, Reginaldo Teixeira Coelho, Divya Prakash, Charalambos Panayiotou Charalambous, Waqar Ahmed, Leonardo Rosa Ribeiro da Silva, and Abner Ankit Lawrence. "A comprehensive review on metallic implant biomaterials and their subtractive manufacturing." The International Journal of Advanced Manufacturing Technology 120, no. 3-4 (2022): 1473-1530.
Duan, Ranxi, Sheng Li, Biao Cai, Weiwei Zhu, Fuzeng Ren, and Moataz M. Attallah. "A high strength and low modulus metastable β Ti-12Mo-6Zr-2Fe alloy fabricated by laser powder bed fusion in-situ alloying." Additive Manufacturing 37 (2021): 101708.
Ehtemam-Haghighi, Shima, Guanghui Cao, and Lai-Chang Zhang. "Nanoindentation study of mechanical properties of Ti based alloys with Fe and Ta additions." Journal of Alloys and Compounds 692 (2017): 892-897.
Ehtemam-Haghighi, Shima, K. G. Prashanth, Hooyar Attar, Anil K. Chaubey, G. H. Cao, and L. C. Zhang. "Evaluation of mechanical and wear properties of TixNb7Fe alloys designed for biomedical applications." Materials & Design 111 (2016): 592-599.
Ehtemam-Haghighi, Shima, Yujing Liu, Guanghui Cao, and Lai-Chang Zhang. "Influence of Nb on the β→ α ″martensitic phase transformation and properties of the newly designed Ti-Fe-Nb alloys." Materials Science and Engineering: C 60 (2016): 503-510.
Ehtemam-Haghighi, Shima, Yujing Liu, Guanghui Cao, and Lai-Chang Zhang. "Phase transition, microstructural evolution and mechanical properties of Ti-Nb-Fe alloys induced by Fe addition." Materials & Design 97 (2016): 279-286.
Elias, L. M., S. G. Schneider, S. Schneider, H. M. Silva, and F. Malvisi. "Microstructural and mechanical characterization of biomedical Ti-Nb-Zr (-Ta) alloys." Materials Science and Engineering: A 432, no. 1-2 (2006): 108-112.
Eliaz, Noam. "Corrosion of metallic biomaterials: a review." Materials 12, no. 3 (2019): 407.
Gordin, D. M., T. Gloriant, G. Texier, I. Thibon, D. Ansel, J. L. Duval, and M. D. Nagel. "Development of a β-type Ti-12Mo-5Ta alloy for biomedical applications: cytocompatibility and metallurgical aspects." Journal of Materials Science: Materials in Medicine 15, no. 8 (2004): 885-891.
Hanada, Shuji, and Osamu Izumi. "Deformation and Fracture of Metastable Beta Titanium Alloys (Ti-15Mo-5Zr and Ti-15Mo-5Zr-3Al)." Transactions of the Japan Institute of Metals 23, no. 2 (1982): 85-94.
Hao, Y. L., S. J. Li, S. Y. Sun, C. Y. Zheng, and Rui Yang. "Elastic deformation behaviour of Ti-24Nb-4Zr-7.9 Sn for biomedical applications." Acta biomaterialia 3, no. 2 (2007): 277-286.
Ho, Wen-Fu. "A comparison of tensile properties and corrosion behavior of cast Ti-7.5 Mo with cp Ti, Ti-15Mo and Ti-6Al-4V alloys." Journal of Alloys and Compounds 464, no. 1-2 (2008): 580-583.
Hou, Y. P., S. Guo, X. L. Qiao, T. Tian, Q. K. Meng, X. N. Cheng, and X. Q. Zhao. "Origin of ultralow Young׳ s modulus in a metastable β-type Ti-33Nb-4Sn alloy." Journal of the Mechanical Behavior of Biomedical Materials 59 (2016): 220-225.
Jiang, Beibei, Qing Wang, Donghui Wen, Fen Xu, Guoqing Chen, Chuang Dong, Lixian Sun, and Peter K. Liaw. "Effects of Nb and Zr on structural stabilities of Ti-Mo-Sn-based alloys with low modulus." Materials Science and Engineering: A 687 (2017): 1-7.
Jiang, Beibei, Qing Wang, Xiaona Li, Chuang Dong, Fen Xu, Huan He, and Lixian Sun. "Structural stability of the metastable β-[(Mo 0.5 Sn 0.5)-(Ti 13 Zr 1)] Nb 1 alloy with low young's modulus at different states." Metallurgical and Materials Transactions A 48 (2017): 3912-3919.
Kumar, GLGSB Srinivas, Soumyajeeth Chinara, Sreetam Das, Chandrashekhar Tiwari, and GVS Nageswara Rao. "Studies on Ti-29Nb-13Ta-4.6 Zr alloy for use as a prospective biomaterial." Materials Today: Proceedings 15 (2019): 11-20.
Kuroda, Daisuke, Mitsuo Niinomi, Masahiko Morinaga, Yosihisa Kato, and Toshiaki Yashiro. "Design and mechanical properties of new β type titanium alloys for implant materials." Materials Science and Engineering: A 243, no. 1-2 (1998): 244-249.
Laheurte, P., F. Prima, A. Eberhardt, T. Gloriant, M. Wary, and E. Patoor. "Mechanical properties of low modulus β titanium alloys designed from the electronic approach." Journal of the mechanical behavior of biomedical materials 3, no. 8 (2010): 565-573.
Lan, Chun Bo, Li Li Guo, and Feng Chen. "Microstructure and Final Properties of Cold-Rolled Ti-32.5 Nb-6.8 Zr-2.7 Sn-0.3 O Biomedical β Titanium Alloy." In Materials Science Forum, vol. 886, pp. 59-63. Trans Tech Publications Ltd, 2017.
Li, Peiyou, Xindi Ma, Duo Wang, and Hui Zhang. "Microstructural and mechanical properties of β-type Ti-Nb-Sn biomedical alloys with low elastic modulus." Metals 9, no. 6 (2019): 712.
Li, Peiyou, Xindi Ma, Ting Tong, and Yongshan Wang. "Microstructural and mechanical properties of β-type Ti-Mo-Nb biomedical alloys with low elastic modulus." Journal of Alloys and Compounds 815 (2020): 152412.
Li, Qiang, Guanghao Ma, Junjie Li, Mitsuo Niinomi, Masaaki Nakai, Yuichro Koizumi, Dai-Xiu Wei et al. "Development of low-Young's modulus Ti-Nb-based alloys with Cr addition." Journal of Materials Science 54, no. 11 (2019): 8675-8683.
Li, Qiang, Tengfei Liu, Junjie Li, Chao Cheng, Mitsuo Niinomi, Kenta Yamanaka, Akihiko Chiba, and Takayoshi Nakano. "Microstructure, mechanical properties, and cytotoxicity of low Young's modulus Ti-Nb-Fe-Sn alloys." Journal of Materials Science 57, no. 9 (2022): 5634-5644.
Li, Xia, Shulong Ye, Xini Yuan, and Peng Yu. "Fabrication of biomedical Ti-24Nb-4Zr-8Sn alloy with high strength and low elastic modulus by powder metallurgy." Journal of Alloys and Compounds 772 (2019): 968-977.
Liang, Shunxing. "Review of the design of titanium alloys with low elastic modulus as implant materials." Advanced Engineering Materials 22, no. 11 (2020): 2000555.
Liu, Kai-Yang, Li-Xia Yin, Xu Lin, and Shun-Xing Liang. "Development of Low Elastic Modulus Titanium Alloys as Implant Biomaterials." Recent Progress in Materials 4, no. 2 (2022): 1-14.
Liu, Xingjun, Qinghua Peng, Shaobin Pan, Jingtao Du, Shuiyuan Yang, Jiajia Han, Yong Lu, Jinxin Yu, and Cuiping Wang. "Machine Learning Assisted Prediction of Microstructures and Young's Modulus of Biomedical Multi-Component β-Ti Alloys." Metals 12, no. 5 (2022): 796.
Mao, Chuanyuan, Weijun Yu, Min Jin, Yingchen Wang, Xiaoqing Shang, Lu Lin, Xiaoqin Zeng, Liqiang Wang, and Eryi Lu. "Mechanobiologically optimized Ti-35Nb-2Ta-3Zr improves load transduction and enhances bone remodeling in tilted dental implant therapy." Bioactive Materials 16 (2022): 15-26.
Markowska-Szczupak, Agata, Maya Endo-Kimura, Oliwia Paszkiewicz, and Ewa Kowalska. "Are titania photocatalysts and titanium implants safe? Review on the toxicity of titanium compounds." Nanomaterials 10, no. 10 (2020): 2065.
Matsumoto, Hiroaki, Sadao Watanabe, and Shuji Hanada. "Beta TiNbSn alloys with low Young's modulus and high strength." Materials Transactions 46, no. 5 (2005): 1070-1078.
MatWeb, materials properties data. "Titanium Alloy Property Data", accessed March 1, 2023. Link.
Milojkov, Dušan V., Ana S. Radosavljević-Mihajlović, Vojislav Dj Stanić, Branislav J. Nastasijević, Ksenija Radotić, Ivona Janković-Častvan, and Vukosava Živković-Radovanović. "Synthesis and characterization of luminescent Cu2+-doped fluorapatite nanocrystals as potential broad-spectrum antimicrobial agents." Journal of Photochemistry and Photobiology B: Biology (2023): 112649.
Moghadasi, Kaveh, Mohammad Syahid Mohd Isa, Mohammad Ashraf Ariffin, Sufian Raja, Bo Wu, Mehrdad Yamani, Mohd Ridha bin Muhamad et al. "A review on biomedical implant materials and the effect of friction stir based techniques on their mechanical and tribological properties." Journal of Materials Research and Technology 17 (2022): 1054-1121.
Mohammed, Mohsin Talib, Zahid A. Khan, and Arshad N. Siddiquee. "Beta titanium alloys: the lowest elastic modulus for biomedical applications: a review." Int. J. Chem. Mol. Nucl. Mater. Metall. Eng 8, no. 8 (2014): 72.
Morgado, T. L. M., H. Navas, and R. Brites. "Wear study of innovative Ti-Ta alloys." Procedia Structural Integrity 2 (2016): 1266-1276.
Moshokoa, Nthabiseng Abigail, Mampai Lerato Raganya, Ronald Machaka, Mamookho Elizabeth Makhatha, and Babatunde Abiodun Obadele. "The effect of molybdenum content on the microstructural evolution and tensile properties of as-cast Ti-Mo alloys." Materials Today Communications 27 (2021): 102347.
Nnamchi, Paul S., C. S. Obayi, Iain Todd, and M. W. Rainforth. "Mechanical and electrochemical characterisation of new Ti-Mo-Nb-Zr alloys for biomedical applications." Journal of the mechanical behavior of biomedical materials 60 (2016): 68-77.
Nunes, Aline Raquel Vieira, Sinara Borborema Gabriel, Carlos Angelo Nunes, Leonardo Sales Araújo, Renato Baldan, Paulo Mei, Loïc Malet, Jean Dille, and Luiz Henrique de Almeida. "Microstructure and mechanical properties of Ti-12Mo-8Nb alloy hot swaged and treated for orthopedic applications." Materials Research 20 (2017): 526-531.
Nunes, Aline Raquel Vieira, Sinara Borborema, Loïc Malet, Jean Dille, and Luiz Henrique de Almeida. "Microstructural Evolution of Cold-Rolled β Metastable Ti-29Nb-2Mo-6Zr Alloy." Microscopy and Microanalysis 25, no. S2 (2019): 2634-2635.
Panigrahi, Ajit, et al. "Mechanical properties, structural and texture evolution of biocompatible Ti-45Nb alloy processed by severe plastic deformation." Journal of the mechanical behavior of biomedical materials 62 (2016): 93-105.
Peng, Yu-Po, Jiin-Huey Chern Lin, and Chien-Ping Ju. "Performance assessment of Ti-7.5 Mo alloy for removable partial denture application." Materials Transactions 60, no. 11 (2019): 2311-2318.
Pinotti, Vitor Eduardo, Athos Henrique Plaine, Murillo Romero da Silva, and Claudemiro Bolfarini. "Influence of oxygen addition and aging on the microstructure and mechanical properties of a β-Ti-29Nb-13Ta-4Mo alloy." Materials Science and Engineering: A 819 (2021): 141500.
Plaine, Athos H., Murillo R. da Silva, and Claudemiro Bolfarini. "Microstructure and elastic deformation behavior of β-type Ti-29Nb-13Ta-4.6 Zr with promising mechanical properties for stent applications." Journal of Materials Research and Technology 8, no. 5 (2019): 3852-3858.
Prasad, Karthika, Olha Bazaka, Ming Chua, Madison Rochford, Liam Fedrick, Jordan Spoor, Richard Symes et al. "Metallic biomaterials: current challenges and opportunities." Materials 10, no. 8 (2017): 884.
Raganya, Lerato, Nthabiseng Moshokoa, Babatunde Obadele, Elizabeth Makhatha, and Ronald Machaka. "Microstructure and mechanical properties of Ti-Mo-Nb alloys designed using the cluster-plus-glue-atom model for orthopedic applications." The International Journal of Advanced Manufacturing Technology 115, no. 9-10 (2021): 3053-3064.
Raganya, M. L., N. M. Moshokoa, B. Obadele, P. A. Olubambi, and R. Machaka. "The microstructural and mechanical characterization of the β-type Ti-11.1 Mo-10.8 Nb alloy for biomedical applications." In IOP Conference Series: Materials Science and Engineering, vol. 655, no. 1, p. 012025. IOP Publishing, 2019.
Salvador, Camilo AF, Eloa L. Maia, Fernando H. Costa, Julian D. Escobar, and João P. Oliveira. "A compilation of experimental data on the mechanical properties and microstructural features of Ti-alloys." Scientific data 9, no. 1 (2022): 188.
Salvador, Camilo AF, Mariana R. Dal Bo, Dalton D. Lima, Caetano R. Miranda, and Rubens Caram. "Experimental and computational investigation of Ti-Nb-Fe-Zr alloys with limited Fe contents for biomedical applications." Journal of Materials Science 56 (2021): 11494-11510.
Salvador, Camilo AF, Mariana R. Dal Bó, Fernando H. Costa, Marcia O. Taipina, Eder SN Lopes, and Rubens Caram. "Solute lean Ti-Nb-Fe alloys: an exploratory study." Journal of the Mechanical Behavior of Biomedical Materials 65 (2017): 761-769.
Santos, Pedro Fernandes, Mitsuo Niinomi, Huihong Liu, Ken Cho, Masaaki Nakai, Yoshinori Itoh, Takayuki Narushima, and Masahiko Ikeda. "Fabrication of low-cost beta-type Ti-Mn alloys for biomedical applications by metal injection molding process and their mechanical properties." Journal of the mechanical behavior of biomedical materials 59 (2016): 497-507.
Santos, Pedro Fernandes, Mitsuo Niinomi, Huihong Liu, Ken Cho, Masaaki Nakai, Adhitya Trenggono, Sébastien Champagne, Hendra Hermawan, and Takayuki Narushima. "Improvement of microstructure, mechanical and corrosion properties of biomedical Ti-Mn alloys by Mo addition." Materials & Design 110 (2016): 414-424.
Santos, Pedro Fernandes, Mitsuo Niinomi, Ken Cho, Masaaki Nakai, Huihong Liu, Naofumi Ohtsu, Mitsuhiro Hirano, Masahiko Ikeda, and Takayuki Narushima. "Microstructures, mechanical properties and cytotoxicity of low cost beta Ti-Mn alloys for biomedical applications." Acta biomaterialia 26 (2015): 366-376.
Schneider, S. G., C. A. Nunes, S. O. Rogero, O. Z. Higa, and J. C. Bressiani. "Mechanical properties and cytotoxic evaluation of the Ti-3Nb-13Zr alloy." Biomecánica 8 (2000) 84-87.
Sidhu, Sarabjeet Singh, Harpreet Singh, and Mohamed Abdel-Hady Gepreel. "A review on alloy design, biological response, and strengthening of β-titanium alloys as biomaterials." Materials Science and Engineering: C 121 (2021): 111661.
Song, Y., R. Yang, D. Li, Z. Q. Hu, and Z. X. Guo. "A first principles study of the influence of alloying elements on TiAl: site preference." Intermetallics 8, no. 5-6 (2000): 563-568.
Stráský, Josef, Dalibor Preisler, Hanuš Seiner, Lucie Bodnárová, Michaela Janovská, Tereza Košutová, Petr Harcuba et al. "Achieving high strength and low elastic modulus in interstitial biomedical Ti-Nb-Zr-O alloys through compositional optimization." Materials Science and Engineering: A 839 (2022): 142833.
Stráský, Josef, Petr Harcuba, Kristína Václavová, Klaudia Horváth, Michal Landa, Ondřej Srba, and Miloš Janeček. "Increasing strength of a biomedical Ti-Nb-Ta-Zr alloy by alloying with Fe, Si and O." Journal of the mechanical behavior of biomedical materials 71 (2017): 329-336.
Sutowo, C., G. Senopati, S. Supriadi, A. W. Pramono, and B. Suharno. "The Influence of Sn addition on the microstructure and mechanical properties of the new β-type Ti-Mo-Nb based alloys for implant material." In IOP Conference Series: Materials Science and Engineering, vol. 541, no. 1, p. 012036. IOP Publishing, 2019.
Tan, Magdalen HC, Alireza Dareh Baghi, Reza Ghomashchi, Wenlong Xiao, and Reza H. Oskouei. "Effect of niobium content on the microstructure and Young's modulus of Ti-xNb-7Zr alloys for medical implants." Journal of the Mechanical Behavior of Biomedical Materials 99 (2019): 78-85.
Tanikić, Dejan I., Manić T. Miodrag, M. Dalibor Đenadić, Ranđelović S. Saša, Milovanović R. Jelena, and Đekić S. Petarb. "Metali i legure u funkciji biomaterijala." Vojnotehnički glasnik 60, no. 2 (2012): 202-215.
Tiwari, G. P., and R. V. Ramanujan. "Review The relation between the electron to atom ratio and some properties of metallic systems." Journal of materials science 36 (2001): 271-283.
Vishnu, Jithin, Magesh Sankar, H. J. Rack, Nageswara Rao, A. K. Singh, and Geetha Manivasagam. "Effect of phase transformations during aging on tensile strength and ductility of metastable beta titanium alloy Ti-35Nb-7Zr-5Ta-0.35 O for orthopedic applications." Materials Science and Engineering: A 779 (2020): 139127.
Welsch, Gerhard, Rodney Boyer, and E. W. Collings, eds. Materials properties handbook: titanium alloys. ASM international, 1993.
Wu, Chun-Te, Hsiao-Tzu Chang, Chien-Yu Wu, Shi-Wei Chen, Sih-Ying Huang, Mingxin Huang, Yeong-Tsuen Pan, Peta Bradbury, Joshua Chou, and Hung-Wei Yen. "Machine learning recommends affordable new Ti alloy with bone-like modulus." Materials Today 34 (2020): 41-50.
Wu, Chun-Te, Po-Hsun Lin, Sih-Ying Huang, Yu-Jen Tseng, Hsiao-Tzu Chang, Sheng-Yen Li, and Hung-Wei Yen. "Revisiting alloy design of low-modulus biomedical β-Ti alloys using an artificial neural network." Materialia 21 (2022): 101313.
Xie, Fangxia, Hao Yang, Jiabing Huang, Jinghu Yu, and Xueming He. "Sn content effects on microstructure, mechanical properties and tribological behavior of biomedical Ti-Nb-Sn alloys fabricated by powder metallurgy." Metals 12, no. 2 (2022): 255.
Xiong, Jie, San-Qiang Shi, and Tong-Yi Zhang. "A machine-learning approach to predicting and understanding the properties of amorphous metallic alloys." Materials & design 187 (2020): 1083.
Yan, Lamei, Youwei Yuan, Linjun Ouyang, Hong Li, Alireza Mirzasadeghi, and Li Li. "Improved mechanical properties of the new Ti-15Ta-xZr alloys fabricated by selective laser melting for biomedical application." Journal of Alloys and Compounds 688 (2016): 156-162.
Yang, Fei, Zhen Li, Qing Wang, Beibei Jiang, Biaojie Yan, Pengcheng Zhang, Wei Xu, Chuang Dong, and Peter K. Liaw. "Cluster-formula-embedded machine learning for design of multicomponent β-Ti alloys with low Young's modulus." npj Computational Materials 6, no. 1 (2020): 101.
Yu, Z., X. Ma, G. Wang, S. Yu, Q. Sun, and K. Damon. "Microstructure and mechanical properties of biomedical near-β Ti alloy TLM with nanostructure by ARB process." In Ti 2011-Proceedings of the 12th World Conference on Titanium, vol. 3, pp. 2054-2058. Science Press, 2012.
Zhan, Yongzhong, Chunliu Li, and Wenping Jiang. "β-type Ti-10Mo-1.25 Si-xZr biomaterials for applications in hard tissue replacements." Materials Science and Engineering: C 32, no. 6 (2012): 1664-1668.
Zhang, Wei-dong, Yong Liu, Hong Wu, Min Song, Tuo-yang Zhang, Xiao-dong Lan, and Tian-hang Yao. "Elastic modulus of phases in Ti-Mo alloys." Materials Characterization 106 (2015): 302-307.
Zhao, Changli, Xiaonong Zhang, and Peng Cao. "Mechanical and electrochemical characterization of Ti-12Mo-5Zr alloy for biomedical application." Journal of Alloys and Compounds 509, no. 32 (2011): 8235-8238.
Zhao, Xiaoli, Mitsuo Niinomi, Masaaki Nakai, Goro Miyamoto, and Tadashi Furuhara. "Microstructures and mechanical properties of metastable Ti-30Zr-(Cr, Mo) alloys with changeable Young's modulus for spinal fixation applications." Acta biomaterialia 7, no. 8 (2011): 3230-3236.
Zhou, Ying Long, Mitsuo Niinomi, and Toshikazu Akahori. "Effects of Ta content on Young's modulus and tensile properties of binary Ti-Ta alloys for biomedical applications." Materials Science and Engineering: A 371, no. 1-2 (2004): 283-290.
Zhu, Chengpeng, Chao Li, Di Wu, Wan Ye, Shuangxi Shi, Hui Ming, Xiaoyong Zhang, and Kechao Zhou. "A titanium alloys design method based on high-throughput experiments and machine learning." Journal of Materials Research and Technology 11 (2021): 2336-2353.
Zou, Chengxiong, Jinshan Li, William Yi Wang, Ying Zhang, Deye Lin, Ruihao Yuan, Xiaodan Wang et al. "Integrating data mining and machine learning to discover high-strength ductile titanium alloys." Acta Materialia 202 (2021): 211-221.
Downloads
Published
Issue
Section
License
Copyright (c) 2023 Vaso D Manojlović, Gordana Marković
This work is licensed under a Creative Commons Attribution 4.0 International License.
